Resume button function This function makes it possible, by pressing the button, to return the vehicle to the last speed value memorized if the Cruise Control has been switched off in certain circumstances (for example, by operating the clutch or braking). System adjustment does not cut in under the following circumstances: - with a manual gearbox, in neutral, reverse, 1st speed - with an automatic/sequential transmission, with the lever in position P, N, R and 1st speed. The Cruise Control system can operate throughout the permitted engine rpm range and can manage cars with manual or automatic/sequential gearboxes. (B) Speed decrease: - push the lever downwards: having achieved the reduction in the vehicle speed in relation to the speed set previously using the Cruise Control, release the lever and the system will maintain the new vehicle speed. Variation in the speed memorized If you wish to alter the vehicle speed memorized it is necessary to: (A) Speed increase: - push the lever upwards: this produces an acceleration ramp at a constant, programmable gradient - when the lever is released (automatic return), the system keeps the new speed reached by the vehicle memorized. The warning light going out indicates that the system is deactivated. release the accelerator pedal and let the system work directly - the warning light in the instrument panel should come on constantly with the signal coming from the engine management control unit, via the CAN, indicating the Cruise Control operating status. push the steering column switch unit lever upwards to increase the speed, the lever returns automatically (unstable). It is advisable to engage it in fourth gear or higher where the road conditions allow the speed set to be maintained safely. Memorizing the speed selected To activate the operation of the Cruise Control: - operate the ring nut switch to the ON position - let the vehicle reach the desired speed it should be remembered that the Cruise Control can only be activated for speeds above 40 km/h. It automatically maintains the cruising speed set by the user through the direct management of the engine. The electronic system is managed by the engine management control unit. 1 - Resume button recalls a stored speed 2 - Lever with the vehicle speed increase/decrease memorizing function 3 - Ring nut switch (ON: Cruise attivated OFF: Cruise deactivated).
0 kommentar(er)
